Dental lab gypsum finishing equipment wet and dry dental plaster model dressing machine factory denture model trimmer
This is a high-power, low-noise plaster model trimming machine. The motor has a power of 500W, a speed of 2800 rpm, and a voltage of 220V/50Hz (110V/60Hz). The overall structure of the motor mounting base and bracket has obtained a national utility model patent.
Feture of dental plaster model trimmer for dental lab with diamond disc
This denture model trimmer is widely used in the oral cavity repair profession, is each kind of gypsum model repair grinding, the shaping must use product, this machine has ≡30 degrees Angle adjustment, can make the gypsum model repair more perfect.
1. Fix the gypsum trimmer on the work table first and tighten the four anchor screws to avoid vibration.
2. First, tighten the inlet pipe and joint to avoid falling off and burn the motor by splashing water into the motor.
3. Tighten all connecting screws of the machine to prevent looseness.
4. Start the power supply and observe whether the motor makes no noise and whether the sand blade rotates smoothly. If there is any abnormality, stop the machine immediately for maintenance.
5. Observe whether the water supply has dust removal and remove the adhesion of gypsum powder on sand flakes. If the effect is not good, the water pressure can be adjusted.
6. The Angle adjustment of the grinding machine is light and flexible,& LT;30 degrees,can be ground into 75 degrees - 105 degrees different Angle surface
Technical parameters of denture model trimmer
Power requirement :220V50HZ
Machine power :550W(two models)
Water pressure: not less than 0.5kg/cm
Speed :2800 RPM
Size: 47 *36 * 33 (cm)
Weight: 22 kg
High Performance Rotary Dry Model Trimming Machine That Is Convertible For Wet Trimming Operation
1. Fast and Accurate Trimming - Dry trimming eliminates the potential ecological and accuracy problems associated with wet trimming.
2. Convertible for Dry or Wet Operation - Pre-mounted water solenoid valves to wet trimming operation for maximum versatility.
3. New Exhaust Port Design - 3.6cm OD exhaust port promotes better capture of dry and wet grinding debris resulting in less cleaning.
Q1: Are you a manufacture or a trading company?
A: We are factory, we produce dental chair and specialized in the design and sales of related dental equipment,like Air compressor, Dental handpiece, Dental Trolley, Dental Suction Unit etc.
Q2: How long is the warranty and what does it cover?
A: All dental equipments has 1/2 year manufacturer warranty. Each warranty period begins at the date of Receiving date and ends after one year.All warranty claims will be void due to neglect damage, lack of maintenance or improper handling, so we suggest to consult the manufacturer before private maintenance and following the instrution.
Q3: Do you test all your goods before delivery?
A: Yes, we have a complete supply chain, the products we cooperate have strictly inspection, select carefully, ensure that all products come from excellent manufacturer and have a strict test before delivery.
Q4: Where is your factory located? How can I visit there?
A: Our factory is located in Foshan City, Guangdong Province, China, which is near Guangzhou. You can fly to Baiyun airport then take tax or metro to Foshan directly, and we also supply Airport Pick-up if need. All our clients are warmly welcome to visit us!
Q5: What are your terms of payment?
A: 1. For large quantity, 30% T/T or Western Union deposit payment before production, 70% balance must be paid before shipment
2.For a few amount, full payment should be made within 5 working days of placing your order.
3.Alibaba online payment for qualified order.
Q6: How can I get EXW or C&F price?
A: If you are sourcing a product, welcome to send us an email or call us and inform which country are you from, our regional representative will send you specific information. Normally the production time of our products is from 1 week to 2 weeks depending on the quantity ordered.
Your message must be between 20-3,000 characters!
